Terex® Finlay 206 Logwasher

Available in both static and mobile versions, the Terex® Finlay 206 Logwasher has been designed to remove clay conglomerates from stone products. Two inclined shafts rigorously agitate the material and using the archimedial screw principal, the stone is pushed forward towards the discharge chute. An additional option of a final rinse followed by dewatering on a small dewatering screen can be mounted at the outlet if required. The water containing the broken down clay particles is weired off at the rear of the Logwasher.



0010
010 011


DRIVE:

  • 45kw electric motor coupled by V-belt to two reduction gear boxes

     

FEEDBOOT & TANK:

  • 6m x 1.9m heavy duty reinforced washing box mounted on a subframe c/w
  • catwalk
  • Feed boot complete with dead plate
  • Adjustable overflow weirs
  • Under side access doors
  • Water seals between washing box and bearings
  • Rinsing spray bars

LOGS & PADDLES:

  • Log shafts mounted at both ends on plummer block bearings
  • 6m long x 915mm diameter twin shaft paddle system
  • First 600mm c/w spiral type flights and bolt on wearing edges
  • 67 nr Abbrasion Resistant Plate paddles per log shaft individually bolted
  • c/w adjustable height
  • Log speed 35 r.p.m.

CHUTE AND TROUGHING:

  • Outlet chute c/w polyurethane panel and rinsing bar

GENERAL:

  • Water check valve for main water inlet
  • Guards to M & Q specification
  • Emergency stops (3 nr)